Applications

Commercial & industrial rooftops

Fire-safe, halogen-free cables for factory and warehouse roofs.

Halogen-free, flame-retardant H1Z2Z2-K and twin-core cables in covered trays, plus 0.6/1 kV AC cable to the main switchboard — for roofs where fire codes, insurers and building owners look closely.

  • Halogen-free, low smoke
  • Twin-core for neat trays
  • 0.6/1 kV AC to switchboard
Applications

From the module to the grid — every cable, one supplier.

Pick a project type and follow the power through the plant, with the matching cable on every section.

  1. 1Rooftop arrayTwin-Core Solar Cable H1Z2Z2-K 2×4 / 2×6 mm²
  2. 2String invertersAC Inverter Cable 0.6/1 kV XLPE (Cu / Al)
  3. 3AC combiner panelAC Inverter Cable 0.6/1 kV XLPE (Cu / Al)
  4. 4Building LV switchboard
  5. 5Utility grid

On a factory roof, H1Z2Z2-K or twin-core cable runs in covered trays to string inverters; 0.6/1 kV AC cable takes the output to the AC combiner panel and the building's main switchboard.

Assemblies & OEMY-Branch Solar Cable Harness
Inside a solar cable built for 25 years. H1Z2Z2-K · EN 50618
EN 50618 · IEC 62930

Inside a solar cable built for 25 years.

A PV cable lives on a roof or tracker in full sun, frost, rain and wind for decades. Every layer of our DC cable is chosen for that life — and tested for it.

  1. Tinned copper, class 5

    Fine tinned strands stay flexible on the tracker and resist corrosion in humid and coastal air.

  2. E-beam cross-linked XLPO

    Electron-beam cross-linked insulation and sheath: 120 °C conductor rating, halogen-free, UV and ozone resistant.

  3. 1.5 kV DC, double insulated

    Rated 1.5/1.5 kV DC (1.8 kV max.) for today's 1,500 V string designs, class II safety.

  4. Assemblies to your drawing

    Extension leads, Y-branches and complete harnesses cut, crimped, tested and labelled per string.

Planning a solar project?

Send the array layout, string current and route lengths. You get a cable schedule, sizing check and quotation within one working day.