Floating PV & wet sites
AD8 water-resistant cable for reservoirs and ponds.
On floating plants and flood-prone ground, cables lie in water for years. Our AD8-rated solar cable is built for permanent immersion, with a sheath that resists hydrolysis, algae and UV.
- AD8 permanent immersion
- Hydrolysis & algae resistant
- 1.5 kV DC
From the module to the grid — every cable, one supplier.
Pick a project type and follow the power through the plant, with the matching cable on every section.
- 1PV modules & stringsH1Z2Z2-K Solar Cable EN 50618, 1.5 kV DC
- 2String combiner boxAluminium-Alloy Solar DC Cable 1.5 kV
- 3Central / string inverterAC Inverter Cable 0.6/1 kV XLPE (Cu / Al)
- 4Step-up box transformer33 kV MV Collector Cable, XLPE Aluminium / Copper
- 5Plant substation & grid
Module leads and H1Z2Z2-K string cables run to the combiner box; aluminium DC home-runs feed the inverter, AC cable connects the step-up transformer and 33 kV collector cable carries the power to the plant substation.
Assemblies & OEMY-Branch Solar Cable HarnessFeatured solar cables
DC solar cables · H1Z2Z2-K AD8 1×4Floating PV Solar Cable, AD8 Water-ResistantMade to lie in water for years — for floating plants and wet ground.
- Cross-section1.5 – 240 mm²
- Rated voltage1.5 kV DC
- StandardAD8 · EN 50618
DC solar cables · H1Z2Z2-K 1×4H1Z2Z2-K Solar Cable EN 50618, 1.5 kV DCThe standard DC string cable for 1,500 V solar plants — 4 mm² and 6 mm² in stock colours.
- Cross-section1.5 – 240 mm²
- Rated voltage1.5 kV DC
- StandardEN 50618
Aluminium solar cables · XY-PVAL 1×70Aluminium-Alloy Solar DC Cable 1.5 kVCut DC home-run costs by up to half on large plants.
- Cross-section16 – 400 mm² Al
- Rated voltage1.5 kV DC
- StandardIEC 62930
Made by Xinya
AC & MV collector cables · NA2XS(F)2Y 18/30 kV33 kV MV Collector Cable, XLPE Aluminium / CopperThe collector circuit between your box transformers and the plant substation.
- Cross-section50 – 630 mm²
- Rated voltage18/30 – 26/35 kV
- StandardIEC 60502-2
Connectors & accessories · XY-MC4-1500MC4 Solar Connector 1,500 V DC, IP68Low-resistance connectors that match our cables.
- Cross-section2.5 – 10 mm²
- Rated voltage1.5 kV DC
- StandardIEC 62852
H1Z2Z2-K · EN 50618Inside a solar cable built for 25 years.
A PV cable lives on a roof or tracker in full sun, frost, rain and wind for decades. Every layer of our DC cable is chosen for that life — and tested for it.
- Tinned copper, class 5
Fine tinned strands stay flexible on the tracker and resist corrosion in humid and coastal air.
- E-beam cross-linked XLPO
Electron-beam cross-linked insulation and sheath: 120 °C conductor rating, halogen-free, UV and ozone resistant.
- 1.5 kV DC, double insulated
Rated 1.5/1.5 kV DC (1.8 kV max.) for today's 1,500 V string designs, class II safety.
- Assemblies to your drawing
Extension leads, Y-branches and complete harnesses cut, crimped, tested and labelled per string.
Planning a solar project?
Send the array layout, string current and route lengths. You get a cable schedule, sizing check and quotation within one working day.

